Leveling the SW1

The SW1 must be leveled for accurate results. If it’s tilted, gravity will affect the motion of the racquet.

  1. Place the SW1 on a stable surface away from air currents.
  2. If the spring is engaged, disengage it.
  3. Mount the calibration rod in the cradle. Fully extend the extendable rod.
    Mount Calibration Rod
  4. Adjust the three leveling feet until the cradle stays nearly stationary when released from any position. How?
    Adjust Leveling Feet
  5. Re-engage the spring with the raised bump on each spring stop.
    Re-engage Spring 1 Re-engage Spring 2

Leveling is Complete

Move on to calibrating the SW1.

Back⏎